Sunglasses Logo Information & Related Packing
Sunglasses Logo Information
Below we will show you the information about the sunglasses logo. Including the location, size, method, style, etc. of the laser logo.
What logo we can choose?
You can freely choose logos such as patterns, text, symbols, etc.
Is there a limit to the size of the logo?
We will not limit the size of your logo. But you need to send us the pattern of your logo and the required size. We need to make sure that the logo can be made in the right place.
Where can I make a logo?
The main locations for making the logo are temples, lenses, boxes & bags.
Temple
We usually make your logo on the inside and outside of the temples of the sunglasses.
Lens
We usually do not recommend making a logo on the lens, but if you need it, we can still provide you with services.
Boxes
In addition to making the logo on the sunglasses, you can choose to make the corresponding logo on your box.
What are the types of sunglasses logos?
At present, the commonly used logo production methods include laser, laser dot paint, silkscreen, metal label, crystal glue.
Laser
After adjusting the position of the temples, start the laser engraving machine. Create the corresponding logo by burning the surface of the material.
This method is relatively cheap and has a short production time. But the color is relatively single, so you can’t make too complex logos (very small and dense patterns)
Laser spot paint
On the basis of the laser method, we also added a coloring process.
In this way, we can make a single logo color into Pantone color. But because the basis of this method is a laser. Therefore, it also cannot avoid the disadvantage of not being able to make an overly complex logo.
Silkscreen
First, make a printed version of the logo. Then infiltrate the prepared ink into the screen printing plate to obtain the corresponding logo mark.
The logo color is very rich. Preparatory work such as the screen template and ink preparation takes a long time.
UP Metal Tag
Compared with other logo-making methods, metal labels are the most expensive.
The reason is that this method has strict production technology, high selection standards, and long mold design time.
At the same time, for these reasons, the metal logo has a distinct three-dimensional effect. At the same time, the logo has a very bright luster, and abrasion resistance is also very good.
Crystal glue
This is a colloidal logo with a flat structure. It can have a variety of colors. And it has relatively good wear resistance, this kind of logo can usually be used for 2-3 years.
But the impact resistance of this logo is not very good. (Normal use, touching, or dropping the glasses will not affect it)
Of course, if you have your favorite logo-making method. And this method is not mentioned by us, you can tell us. We will do our best to make a suitable logo for you.
What does the logo look like on the different material packaging of the glasses?
We also have many other types of glasses packing, if you have an interest in it. Pls, click on the sunglasses storage boxes.
Of course, if you have a box with a shape you like. As long as you send us the materials, dimensions, and pictures, we can also make them for you.
.